How to configure IP camera with static IP

How to install a surveillance camera

Various models for private use are commercially available: video surveillance cameras, fictitious cameras, infrared night vision sensors, network video surveillance systems, continuous recording cameras or motion detection cameras (which activate the camera ' picture). Configure IP address in CCTV camera .The installation modalities depend on the chosen model and the type of monitoring required: visualization of the images in real time, remote control, transmission and storage of the videos.
Our practical tips

     Place the camera on a removable media (sometimes supplied) to change the orientation.
     Secure the camera up in a discreet location and hardly accessible for malicious individuals.
     For a so-called "IP" or "network"camera, which allows remote viewing via the Internet, on a computer, a tablet or a phone, you will need a router and a broadband connection.

     Indoor Camera
     Camera Power Supply
     Network adapter
     Window brackets and fixing accessories
     Ethernet cable (2 to 3 m long)
     CD with software.
     Micro SD memory card (2 GB extensible up to 32 GB)
     Manual

The tools

    Led Pencil
     Meter
     Drill
     Screwdriver

    Marker

The steps of the installation

     Install the software on the computer and follow the instructions
     Connect the network bridge to the computer and to the electrical outlet
     Connect the yellow wire to the camera and power supply
     Connect the camera plug
     Secure the camera base up
     Screw the video camera
     Slide the power cord along the wall until it is plugged into an outlet
     Press the "Reset" button to reset the camera

Equipment

     A video recorder
     A hard disc
     A display screen (SVGA)
     One or more surveillance cameras (indoor, outdoor) with cables
     A 12v transformer
     Two audio / video adapter cables
     A multiple socket transformer
     A mouse
     An Ethernet cable

Steps

     Connect the hard disk to the recorder
     Connect the transformer to the power supply of the recorder
     Connect the viewing screen
     Connect the mouse to the USB port of the recorder (storage)
     Connect the recorder to the internet box with an RJ45 cable
     Connect the adapter to the BLC port of the storage
     Connect the socket transformer to the adapter
     Connect the camera to the recorder with an RJ45 cable and another adapter
     Turn on the recorder

The composition of the pack

     A camera
     A user manual
     A CD-ROM installation
     A power cable (mains)
     A network cable
     Wall bracket and wall mounting screws
     A power supply

The steps of the installation

     The connection of the camera to the internet box
     The camera configuration
     Use of the software on a computer or mobile phone